Air = from -25°C to -10°C / from -13°F to 10°F
Find out more
Delivery
home
from 16/09/26
Secure payment
Payment methods
The MX-E range comprises solid and liquid waxes designed for discerning skiers seeking a more environmentally friendly solution without compromising on performance.
Fluorine-free and made from at least 50 per cent bio-based materials, MX-E waxes offer excellent glide whilst effectively nourishing the base. The liquid versions are formulated with an alternative solvent that is not classified as hazardous, thereby reducing risks to health and the environment.
Available to suit all skiing styles and snow conditions, MX-E waxes combine performance, ease of use and environmental commitment, with performance comparable to that of traditional hydrocarbon-based waxes.
Solid waxing:
Dry the base and clean it with a bronze brush, working from the tip towards the tail.
Set the waxing iron to the temperature indicated on the label of the wax to be applied.
Once the temperature has been reached, bring the wax into contact with the iron.
Move the iron back and forth across the base to deposit droplets of wax.
If smoke is produced whilst waxing, your waxing iron is too hot.
Place the iron on the base and spread the wax using back-and-forth movements.
It takes time for the wax to soak into the base.
Don’t go too fast, but never stop moving.
Once the wax is evenly distributed, make two back-and-forth strokes without stopping to achieve a smooth finish.
Clean the iron with a cloth after use. Be careful not to burn yourself.
Wait 2 hours for the wax to cool and soak into the base.
Liquid waxing:
Dry the base and clean it with a bronze brush, working from the tip towards the tail.
If you are using Quickboost > Squeeze and press the can to release the wax.
Move the brush back and forth to spread the wax evenly across the entire base.
If your liquid wax is in a bottle > Take a cloth and soak it in the liquid wax.
Place the cloth on the base and move it back and forth.
If your wax is in spray form > Shake the can and spray lightly and evenly, about 20 cm from the base.
Leave to dry for at least 15 minutes / 2 hours for optimum performance.
Discover all the video tutorials on the VOLA Advice platform and get the most out of your equipment by learning the right maintenance techniques for alpine skiing, cross-country skiing and snowboarding.
Enjoy educational content that’s accessible at any time, available in French and English.
France / en / EUR
Connection
