E-Wax

Solid waxing:

Dry the base and clean it with a bronze brush, working from the tip towards the tail.
Set the waxing iron to the temperature indicated on the label of the wax to be applied.
Once the temperature has been reached, bring the wax into contact with the iron.
Move the iron back and forth across the base to deposit droplets of wax.
If smoke is produced whilst waxing, your waxing iron is too hot.
Place the iron on the base and spread the wax using back-and-forth movements.
It takes time for the wax to soak into the base.
Don’t go too fast, but never stop moving.
Once the wax is evenly distributed, make two back-and-forth strokes without stopping to achieve a smooth finish.
Clean the iron with a cloth after use. Be careful not to burn yourself.
Wait 2 hours for the wax to cool and soak into the base.

Liquid waxing:

Dry the base and clean it with a bronze brush, working from the tip towards the tail.
If you are using Quickboost > Squeeze and press the can to release the wax.
Move the brush back and forth to spread the wax evenly across the entire base.
If your liquid wax is in a bottle > Take a cloth and soak it in the liquid wax.
Place the cloth on the base and move it back and forth.
If your wax is in spray form > Shake the can and spray lightly and evenly from a distance of about 20 cm from the base.
Leave to dry for at least 15 minutes / 2 hours for optimum performance.